Cotto Corto 02
DETAILS
Italian terracotta
12”x 12”x 1/2” Nominal size mosaic sheet
Natural finish
5.70 SF per carton / 6 sheets per carton / 28.66lbs per carton
Sold per carton
Recommended grout joint >2mm
8-10 week lead time
APPLICATIONS
Floor & Wall
Interior & Exterior
Wet applications require a sealer (please refer to the catalog for information)
-
Use a high-performance, no-slip cementitious adhesive for installation.
Install tiles and mosaic sheets with a 2 mm joint for seamless results.
Apply cementitious grout for joint filling.
For walls in direct contact with water, apply a waterproof membrane to the substrate.
After grouting and drying, clean surfaces with a 15-20% diluted phosphoric acid solution (EASYCLEANER) to remove grout, adhesive, and residue.
Leave acid solution on the surface for only 2-3 minutes, rinse thoroughly, and avoid drying during cleaning to prevent damage.
-
For water-exposed walls, apply 2 layers of EASYCARE, a natural hydro and oil repellent sealer that preserves the material’s appearance.
On vertical surfaces, apply EASYCARE wet-on-wet applications.
On floors surfaces, apply EASYCARE wait 30-60 minutes between applications.
For floor installations, finish with EASYWAX after 24 hours for additional surface protection and simplified maintenance. Apply two coats of EASYWAX, waiting 2 hours between applications, with a cotton cloth or brush.
-
For routine cleaning, use neutral detergents; avoid alcohol, acid-based, solvent, or ammonia-based cleaners.
Periodically refresh floor surfaces with EASYWAX, applied either pure or diluted 50% with water, based on wear and tear.
Back to Collection
Project REFERENCES
