COTTO

The Cotto Collection by Audrey Lane is a tribute to timeless Italian craftsmanship, born from the rich Galestro clay of Impruneta. Each piece embodies the warmth and heritage of Tuscany, blending tradition with modern elegance. With its earthy tones and artisanal texture, the Cotto Collection brings an effortless sophistication and rustic charm to any space, creating a truly unforgettable ambiance.

Products

    • Use a high-performance, no-slip cementitious adhesive for installation.

    • Install tiles and mosaic sheets with a 2 mm joint for seamless results.

    • Apply cementitious grout for joint filling.

    • For walls in direct contact with water, apply a waterproof membrane to the substrate.

    • After grouting and drying, clean surfaces with a 15-20% diluted phosphoric acid solution (EASYCLEANER) to remove grout, adhesive, and residue.

    • Leave acid solution on the surface for only 2-3 minutes, rinse thoroughly, and avoid drying during cleaning to prevent damage.

    • For water-exposed walls, apply 2 layers of EASYCARE, a natural hydro and oil repellent sealer that preserves the material’s appearance.

    • On vertical surfaces, apply EASYCARE wet-on-wet applications.

    • On floors surfaces, apply EASYCARE wait 30-60 minutes between applications.

    • For floor installations, finish with EASYWAX after 24 hours for additional surface protection and simplified maintenance. Apply two coats of EASYWAX, waiting 2 hours between applications, with a cotton cloth or brush.

    • For routine cleaning, use neutral detergents; avoid alcohol, acid-based, solvent, or ammonia-based cleaners.

    • Periodically refresh floor surfaces with EASYWAX, applied either pure or diluted 50% with water, based on wear and tear.