DETAILS

APPLICATIONS

- Use a high-performance, no-slip cementitious adhesive for installation.
- Install tiles and mosaic sheets with a 2 mm joint for seamless results.
- Apply cementitious grout for joint filling.
- For walls in direct contact with water, apply a waterproof membrane to the substrate.
- After grouting and drying, clean surfaces with a 15-20% diluted phosphoric acid solution (EASYCLEANER) to remove grout, adhesive, and residue.
- Leave acid solution on the surface for only 2-3 minutes, rinse thoroughly, and avoid drying during cleaning to prevent damage.
- For water-exposed walls, apply 2 layers of EASYCARE, a natural hydro and oil repellent sealer that preserves the material’s appearance.
- On vertical surfaces, apply EASYCARE wet-on-wet applications.
- On floors surfaces, apply EASYCARE wait 30-60 minutes between applications.
- For floor installations, finish with EASYWAX after 24 hours for additional surface protection and simplified maintenance. Apply two coats of EASYWAX, waiting 2 hours between applications, with a cotton cloth or brush.
- For routine cleaning, use neutral detergents; avoid alcohol, acid-based, solvent, or ammonia-based cleaners.
- Periodically refresh floor surfaces with EASYWAX, applied either pure or diluted 50% with water, based on wear and tear.